Innovative and highly efficient accessory drilling and screwing station for corner and truss bed frames
OS 4000 Frame Assembly Station
Logistics Solutions
Fast and precise work – this machine provides a surprising increase in productivity in window manufacturing
Thanks to its easy use and ergonomically designed workflow, corner truss beds can be drilled, fitted and screwed by an employee
Thanks to the movable support system, it is not necessary to drill the connection and screw holes using a template
Unit can be rotated 90 ° for the machining of multi-leaf frames
The adjustment device used to drill the bearing shaft in the Y-direction in multi-wing frames can be positioned by means of raster dimensions
With the screwing feeder that can be moved manually on the horizontal and slide slide, the corner truss beds are screwed to the closed frames
Unit; It is equipped with an automatic screw feed, a screwdriver turbine for screwing in self-tapping bolts and a pneumatic screw-depth stop.
Pneumatic frame clamping and positioning device can be moved on the center of the table
Possible frame duct sizes are between 360 and 3,400 mm
2 pneumatic duct stoppers that can be lowered with the turret for 4 different frame installation depths
Laser assembly to show the screwing location
- Bench length 4.040 mm
- Bench width 1.700 mm
- Total length: 4.220 mm
- Total width: 2.010 mm
- Height 1.720 mm
- Bench height can be adjusted between 950 – 1.050 mm
- Min. frame size 560 x 200 mm
- Max. frame size 3,800 x 1,700 mm
- Min. profile height 54 mm
- Max. profile height: 110 mm
- Weight 650 kg
- Air pressure: 7 bar
- Air consumption:
- Screwdriver approx. 250 l / min.
- Clamping device approx. 40 l / min.
- Screw dimensions:
- Head diameter: 6.0 – 9.0 mm
- Shaft diameter 3.0 – 4.5 mm
- Length approx.10.0 – 35.0 mm
- Electricity: 230/400 V, 3 ~, 50 Hz
